Search by vehicle

Mustang P/S Kit, 1968-1970 289/302/351W Manual Steering

Part # 999021

1968-1970 Mustang complete 14:1 quick ratio power steering conversion kit. Fits 68-70 Mustangs with manual steering and 289/302/351W. Includes all necessary components for conversion. All Borgeson power steering boxes and pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
  
NOTE: Will not fit with factory Z-Bar clutch linkage.
NOTE: Requires 2-Row crank pulley not included.

  • $1058.49
Qty:  
In stock (20 items available)
1968-1970 Mustang complete 14:1 quick ratio power steering conversion kit. Fits 68-70 Mustangs with manual steering and 289/302/351W. Includes all necessary components for conversion. All Borgeson power steering boxes and pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

NOTE: Will not fit with factory Z-Bar clutch linkage.
NOTE: Requires 2-Row crank pulley not included.
    • Weight
      39.44 lbs
    • Part #
      999021
  • Part #
    999021
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
Year Make Model
1970 Ford Mustang
1969 Ford Mustang
1969 Mercury Cougar
1968 Mercury Cougar
1968 Ford Mustang

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

Product questions

  • Alex Donofrio
    Jan 18, 2022, 09:29

    Which V Groove belt is required between the 2-row crank pulley and the new power steering pump on a 351C engine (1970 Mustang Mach 1)

    Administrator
    Jan 18, 2022, 09:31

    This kit is for a 351 Windsor engine, not the Cleveland, the included pump bracket will not fit with the Cleveland and as such I do not have any belt information.

  • Alex
    Jan 10, 2022, 20:57

    Will this fit a 90s block? I have a 1969 mustang with a new 302 crate motor, the motor has a 90s ford block.

    Administrator
    Jan 11, 2022, 07:56

    This will fit the engine you are using. The included pump kit attaches to the drivers side cylinder head.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Customers who bought this product also bought

Related products

Customers who viewed this product bought