Mustang P/S Kit, 1968-1970 289/302/351W Power Steering

Part # 999024

1968-1970 Mustang complete 14:1 quick ratio power steering conversion kit. Fits 68-70 Mustangs with power steering and 289/302/351W V-8. Includes all necessary components for conversion. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY 

NOTE: Will not fit with factory Z-Bar clutch linkage.
  • $915.31
Qty:  
In stock (12 items available)
OR
1968-1970 Mustang complete 14:1 quick ratio power steering conversion kit. Fits 68-70 Mustangs with power steering and 289/302/351W V-8. Includes all necessary components for conversion. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY  
  
 NOTE: Will not fit with factory Z-Bar clutch linkage.
    • Weight
      25.34 lbs
    • Part #
      999024
  • Part #
    999024
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Fitment Type
    Vehicle Specific
Year Make Model
1968 Ford Mustang
1968 Mercury Cougar
1969 Ford Mustang
1969 Mercury Cougar
1970 Ford Mustang
1970 Mercury Cougar

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

Product questions

  • Louis czerwonka
    Jul 23, 2022, 10:27

    Bought borgeson steering box for 1967 mustang installed it.When you start engine touch steering wheel it moves back and fourth will break your hand I have a video

    Administrator
    Jul 25, 2022, 09:34

    This is what happens when the lines are connected backwards. The low pressure return line is closest to the rag joint.

  • Charles Catlin
    Jul 10, 2022, 17:44

    Hello, I recently ordered one of your steering boxes for my 1968 Ford GT 302 Mustang, I did not order it directly from you, which is a big mistake on my part. The part arrived in your company's shipping box, unopened. When I tried to install it I found out that it is way to big to fit in the space the old non power steering box came out of. The one I received looks just like the one you show on your page. All I really want to do here is put power steering on my Mustang and I hope to find some clarity on what my next move is. Thank you. Hope to hear from you soon. PS I have a comparison pic of both new and old.

    Administrator
    Jul 11, 2022, 08:34

    Our steering box part #800111 for a 1968 Mustang requires the stock steering column to be collapsed for installation of the steering box. This is accomplished by tapping on the rag joint flange at the base of the steering column, the inner shaft will then collapse in on itself for the needed clearance to fit our box.

  • Dennis Begley
    Jul 9, 2022, 21:34

    Do i read that this kit will not work with a 4 speed car? (Zbar) Does this kit replace all the existing parts on my 68 mustang power steering except the pump? Control valve?

    Administrator
    Jul 11, 2022, 08:37

    This kit will replace the gearbox, control valve and the hydraulic cylinder. You will maintain your factory pump with this kit. You will need to either fabricate your existing Z-bar for clearance for the hose connections or there is a company in California, Open Tracker Racing Products that manufactures a Z-bar to clear the hose connections on our steering box.

  • Colton Beierman
    Jul 5, 2022, 21:39

    Can the steering gear box be used with a late model power steering pump? In my 68 cougar I have a 5.0 with a pump from a 94 mustang. Will this low volume high pressure pump work with this box?

    Administrator
    Jul 6, 2022, 08:02

    This pump will operate our gearbox just fine however you will need to have a set of hoses made as we do not offer hoses for this application.

  • Ola Wesley
    Jun 28, 2022, 04:58

    Will this kit fit a '68 with a 390 Clevland?

    Administrator
    Jun 28, 2022, 08:23

    While all components in this kit will work with the 390 FE engine it is not a straight forward easy installation with a big block in a Mustang with our conversion box. Please call our office for additional details as to what is required for installation.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Related products

Customers who bought this product also bought

Customers who viewed this product bought