Drag Link Adapter, Ford Mustang / Mid-Sized Ford

Part # 990003

Manual drag link adapter. Replaces control valve on 67-70 Ford Mustangs and other Ford Mid-Sized vehicles equiped with factory style power steering.
Fits The Following Makes-Models:
1967-1970 Mustang
1970-1977 Maverick
1966-1970 Falcon, Fairlane, Ranchero
1968-1971 Torino, Gran-Torino
1975-1980 Granada
  • $175.30
Qty:  
In stock (959 items available)
OR
Manual drag link adapter. Replaces control valve on 67-70 Ford Mustangs and other Ford Mid-Sized vehicles equiped with factory style power steering. 
 
Fits The Following Makes-Models:
1967-1970 Mustang
1970-1977 Maverick
1966-1970 Falcon, Fairlane, Ranchero
1968-1971 Torino, Gran-Torino
1975-1980 Granada
    • Weight
      1.62 lbs
    • Part #
      990003
  • Part #
    990003
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Fitment Type
    Vehicle Specific
Year Make Model
1976 Ford Maverick
1976 Ford Granada
1966 Ford Falcon
1966 Ford Ranchero
1966 Ford Fairlane
1970 Ford Falcon
1970 Ford Fairlane
1970 Ford Mustang
1970 Ford Torino
1970 Ford Ranchero
1970 Ford Maverick
1967 Ford Fairlane
1967 Ford Ranchero
1967 Ford Mustang
1967 Ford Falcon
1975 Ford Granada
1975 Ford Maverick
1971 Ford Maverick
1971 Ford Torino
1971 Ford Ranchero
1980 Ford Granada
1968 Ford Falcon
1968 Ford Torino
1968 Ford Mustang
1968 Ford Fairlane
1968 Ford Ranchero
1977 Ford Granada
1977 Ford Maverick
1969 Ford Falcon
1969 Ford Torino
1969 Ford Mustang
1969 Ford Fairlane
1969 Ford Ranchero
1978 Ford Granada
1979 Ford Granada
1972 Ford Maverick
1973 Ford Maverick
1974 Ford Maverick

Product questions

  • Dman
    Feb 17, 2022, 19:13

    Is the manual steering adapter made in usa? Should you change the idler to a manual? Thanks…D

    Administrator
    Feb 18, 2022, 07:45

    We make these right here in South Carolina, there is no need to change the idler arm.

  • Frank Palkoska
    Nov 24, 2021, 10:33

    Does your PS box require the use of a PS drag link and adapter? I’m converting a 68 mustang from a MS to PS.

    Thank for your time, Frank

    Administrator
    Nov 24, 2021, 10:38

    If your car is currently manual steering you will not need the drag link adapter. The drag link adapter is to replace the control valve on cars equipped with factory power steering.

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Customers who bought this product also bought

Customers who viewed this product bought