Search by vehicle
:
from
to
P/S Conversion 66-77 Ford Bronco (800125)
Part #: 800125
Borgeson offers an integral power steering conversion for your 1966-1977 Bronco. The Borgeson conversion box is a new modern integral power steering gearbox. This gearbox represents the latest generation of integral power steering gearbox technology with true modern power steering feel, feedback and a quicker 14:1 ratio. Borgeson has adapted this box to bolt directly to the factory mounting location and to fit the stock pitman arm. A new universal joint will be required for connection to the stock column and a new hose kit for connection to the pump of your choice. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
800125 SPECIFICATIONS:
Input Shaft: 11/16"-36 Spline
Pitman Shaft: 1-1/4" Ford with 32 Splines and 4 Master Splines
Pressure Port: 14mm X 1.5 Top Seal O-RingÂ
Return Port: 14mm X 1.5 Top Seal O-Ring (Located closest to input shaft)
Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
Flow Rate: 2.5-3.0 GPM Flow Rate Recommended
Vehicle Specific
Check if this part fits your vehicle.
Borgeson offers an integral power steering conversion for your 1966-1977 Bronco. The Borgeson conversion box is a new modern integral power steering gearbox. This gearbox represents the latest generation of integral power steering gearbox technology with true modern power steering feel, feedback and a quicker 14:1 ratio. Borgeson has adapted this box to bolt directly to the factory mounting location and to fit the stock pitman arm. A new universal joint will be required for connection to the stock column and a new hose kit for connection to the pump of your choice. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
800125 SPECIFICATIONS:
Input Shaft: 11/16"-36 Spline
Pitman Shaft: 1-1/4" Ford with 32 Splines and 4 Master Splines
Pressure Port: 14mm X 1.5 Top Seal O-RingÂ
Return Port: 14mm X 1.5 Top Seal O-Ring (Located closest to input shaft)
Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
Flow Rate: 2.5-3.0 GPM Flow Rate Recommended
- Manufacturerborgeson
- CA Proposition 65WARNING
- WARNING:Cancer and reproductive harm - http://www.p65warnings.ca.gov
It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.
It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.
