Steel 3/4-36 X 3/4 Smooth Bore

Part # 013464

Steering Universal Joint, Steel, 3/4-36 X 3/4 Smooth Bore, 3-1/4" Overall Length, 1-5/8" Outside Diameter.
Regular Product
  • $83.36
Qty:  
In stock (965 items available)
OR
Steering Universal Joint, Steel, 3/4-36 X 3/4 Smooth Bore, 3-1/4" Overall Length, 1-5/8" Outside Diameter.
    • Weight
      1 lbs
    • Part #
      013464
  • Manufacturer
    Borgeson
  • Part #
    013464
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Universal Joint Type
    Single Needle Bearing, 35° max angle
  • Universal Joint Material
    Natural Steel
  • Shaft End 1
    3/4"-36 Spline
  • Shaft End 2
    3/4" Smooth Bore
  • Fitment Type
    Regular Product

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

Product questions

  • jim
    Jul 18, 2022, 07:32

    Is it okay to weld the 3/4"round end to the steering column. Otherwise what is the preferred method of securing the coupler to the column?

    Administrator
    Jul 18, 2022, 07:54

    The 3/4" smooth end can be welded or drilled and pinned, if welding do not ground across the joint and wrap the bearings in a cool cloth to prevent overheating, weld joint in quadrants. If pinning use two 3/16" roll pins 90 degrees to each other and 3/8" apart.

  • Chris Mason
    Feb 11, 2022, 21:51

    What is the socket depth on the steering u-joints?
    What is the overall length on single and double, steering u-joints?
    Thanks!!!

    Administrator
    Feb 14, 2022, 08:03

    The overall length of the single joint is 3-1/4", the double joint is 5-1/8", both joints allow for 7/8" shaft insertion on each end.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Customers who bought this product also bought

Customers who viewed this product bought