1"DD Shaft, 36" Long

Part # 409536

Steering Shaft, 1"-DD Steel Tubing, 36" Long
Regular Product
  • $49.05
Qty:  
In stock (160 items available)
OR
Steering Shaft, 1"-DD Steel Tubing, 36" Long
    • Weight
      3.68 lbs
    • Part #
      409536
  • Manufacturer
    borgeson
  • Part #
    409536
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Type
    1" Double D Tube
  • Material
    Steel
  • Length
    36"
  • Fitment Type
    Regular Product

Product questions

  • Rick Gues
    Jun 20, 2022, 13:05

    Does the entire 36" length have the 1"-DD configuration, or is it just on the ends? In other words, if I cut it will it still have the 1"-DD configuration on all ends?

    Administrator
    Jun 20, 2022, 13:25

    This is DD the whole way from end to end.

  • Dale Hitchie
    Apr 20, 2022, 08:27

    Will the hollow 409536 1 inch od ¾ inch shaft work with your 18 inch long 409418 to make a slip joint? Or are these nominal id/od?

    Administrator
    Apr 20, 2022, 08:43

    You will need to deburr the tube and perhaps file a bit for fit. When we do our telescopic shafts we machine a pocket for a flat torsion spring to prevent rattle between shafts. We offer telescopic shafts #450024 and #450036 ready made as well.

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Customers who bought this product also bought

Customers who viewed this product bought