P/S Pump, for Hydro-Boost Brake Applications

Part # 800323

Black Powder Coated Self-Contained P/S Pump with Two Returns for Hydro-Boost, Press-On Shaft. Pump Pressure is 1450-1550 PSI with a 3.0-3.5 GPM Flow Rate. All Borgeson power steering pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

NOTE: To use this pump in a street rod application with Rack & Pinion steering it may be necessary to adjust the relief pressure with our 899001 pressure reduction kit.

Regular Product
  • $183.39
Qty:  
In stock (34 items available)
OR

Black Powder Coated Self-Contained P/S Pump with Two Returns for Hydro-Boost, Press-On Shaft. Pump Pressure is 1450-1550 PSI with a 3.0-3.5 GPM Flow Rate. All Borgeson power steering pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

NOTE: To use this pump in a street rod application with Rack & Pinion steering it may be necessary to adjust the relief pressure with our 899001 pressure reduction kit.

    • Weight
      9.72 lbs
    • Part #
      800323
  • Part #
    800323
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Fitment Type
    Regular Product

Product questions

  • Anthony Abellira
    Oct 14, 2022, 04:06

    Will part # 80323 fit my 02 Ram 3500 with the 8.0/V10 with Hydroboost brake system and the press on pulley, which the truck came with from the factory. Your reply would be greatly appreciated, I’ve bought a Bergeson power steering pump for my GM A body with a hydroboost brake system end it was installed in 2015 I have not had one problem, best pump

    Administrator
    Oct 14, 2022, 08:04

    While the pump will have the correct fittings, shaft size and bolt locations the reservoir is slightly different than the factory pump. We have not test fit this application and do not know if the return tube locations will be problematic in your application.

  • keith McClinton
    Jun 18, 2022, 15:29

    Can this pump be used on Gen IV BBC with Hydro boost brakes

    Administrator
    Jun 20, 2022, 08:43

    Yes, this pump can be used for your application.

  • Michael
    Jun 13, 2022, 01:28

    Is it possible to use this pump on small block chevy in a 69 nova. Thinking about going to Hydro boost brakes

    Administrator
    Jun 13, 2022, 09:04

    You can use this pump on your 69 Nova, you may need to change out the bolts in your bracket to metric as the pump is tapped for M10 X1.5 bolts.

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Customers who bought this product also bought

Related products

Customers who viewed this product bought