Power Steering Boxes

For 1968-1986 Chevy/GMC K-Series & 1987-1991 Chevy/GMC V-Series

Borgeson Street & Performance Quick Ratio Chevy K10 Power Steering Box. Borgeson Universal now offers an all new modern quick ratio power steering box to replace the Saginaw/Delphi 800 series in 68-86 Chevy K10 trucks. This all new power steering box has a quick 12.7:1 ratio with firm modern steering feel. The Borgeson Street & Performance power steering box will bolt directly to the stock location and fit to the original power steering pitman arms. Trucks switching from manual steering will require a power steering pitman arm. Steering box includes adapters to be able to use either O-ring or flare style hose connections. This new Borgeson steering box uses a ¾”-30 spline input shaft and all pre-1977 trucks will require a new rag joint connector #990012. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

Input Shaft: 3/4"-30 Spline

Pitman Shaft: 1-1/4" GM with 9 Splines and a notch

Pressure Port: M18 X 1.5 O-Ring or 11/16"-18 Flare, if using included flare inserts

Return Port: M16 X 1.5 O-Ring or 5/8"-18 Flare, if using included flare inserts

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.5-3.0 GPM Flow Rate Recommended

Expanding on our wildly successful Street & Performance Series of steering gears Borgeson Universal now offers the only quick ratio power steering box to replace the Delphi 800 series in the 1988-1998 Chevrolet and GMC OBS trucks. This all-new power steering box has a quick 12.7:1 ratio with firm modern steering feel. The Borgeson Street & Performance power steering box will bolt directly to the stock location and fit to the original power steering pitman arm, steering shaft and power steering hoses. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY 

Input Shaft: 3/4"-30 Spline

Pitman Shaft: 1-1/4" GM with 32 Splines and 4 Master Splines

Pressure Port: M18 X 1.5 O-Ring

Return Port: M16 X 1.5 O-Ring

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.5-3.0 GPM Flow Rate Recommended

Power steering seal kit for Delphi 670 series steering gears including Borgeson part numbers 800105, 800106, 800108 and 800128. Does not include any instructions, rebuild should be performed by a competent rebuilder.

Power steering seal kit for part #'s 800130, 800132, 800133 and 800134. Does not include any instructions, rebuild should be performed by a competent rebuilder. 

Borgeson Universal now offers an all new modern quick ratio power steering box to replace the Saginaw/Delphi 800 series in most 1965 and up GM muscle cars. This all new power steering box has a quick 12.7:1 ratio with firm modern steering feel. The Borgeson Street & Performance power steering box will bolt directly to the stock location and fit to the original power steering pitman arms. Cars switching from manual steering will require a power steering pitman arm. Steering box includes adapters to be able to use either O-ring or flare style hose connections. This new Borgeson steering box uses a ¾”-30 spline input shaft and all pre-1977 cars will require a new rag joint connector #990012. Fits the following GM vehicle platforms. 1978-1988 G-Body, 1967-1992 F-Body, 1982-1993 S10, 1964-1981 A Body, 1968-1979 X Body. Camaro. Chevelle. Nova. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

Input Shaft: 3/4"-30 Spline

Pitman Shaft: 1-1/4" GM with 32 Splines and 4 Master Splines

Pressure Port: M18 X 1.5 O-Ring or 11/16"-18 Flare, if using included flare inserts

Return Port: M16 X 1.5 O-Ring or 5/8"-18 Flare, if using included flare inserts

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.5-3.0 GPM Flow Rate Recommended

For 1968-1986 Chevy/GMC C-Series & 1987-1991 Chevy/GMC R-Series

Borgeson Street & Performance Quick Ratio Chevy C10 Power Steering Box. Borgeson Universal now offers an all new modern quick ratio power steering box to replace the Saginaw/Delphi 800 series in 68-86 Chevy C10 trucks. This all new power steering box has a quick 12.7:1 ratio with firm modern steering feel. The Borgeson Street & Performance power steering box will bolt directly to the stock location and fit to the original power steering pitman arms. Trucks switching from manual steering will require a power steering pitman arm. Steering box includes adapters to be able to use either O-ring or flare style hose connections. This new Borgeson steering box uses a ¾”-30 spline input shaft and all pre-1977 trucks will require a new rag joint connector #990012. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

Input Shaft: 3/4"-30 Spline

Pitman Shaft: 1-1/4" GM with 32 Splines and 4 Master Splines

Pressure Port: M18 X 1.5 O-Ring or 11/16"-18 Flare, if using included flare inserts

Return Port: M16 X 1.5 O-Ring or 5/8"-18 Flare, if using included flare inserts

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.5-3.0 GPM Flow Rate Recommended

Borgeson has now developed a modern power steering box for the 1962-1972 Mopars. This box fits both factory power & manual steering cars. The Borgeson conversion box offers a 14:1 quick ratio, firm modern power steering feel, drastically increased header clearance and a 10# weight savings over a factory power box. This box bolts directly to the stock K-member mounting location and fits the original 1-1/8” pitman arm. The steering column will need to be shortened for installation of this conversion box. Use of a power steering cooler is highly recommended in these applications. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
NOTE: This box will fit all original Mopar 1-1/8” pitman shafts. If you car has the larger 1-1/4” pitman shaft you will need to purchase part #800127.

STEERING COLUMN MODIFICATIONS
The original steering column shaft will need to be cut and shortened for installation. Connection to the box is then made by drilling and pinning our #036425 Mopar vibration reducing universal joint coupling to the shortened steering column shaft. Drill bit and pins included with coupler.

Input Shaft: 11/16"-36 Spline

Pitman Shaft: 1-1/8" Mopar with 32 Splines and 4 Master Splines

Pressure Port: 16mm X 1.5 Flare (Located closest to engine)

Return Port: 16mm X 1.5 Flare (Located closest to input shaft)

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.0-2.5 GPM Flow Rate Recommended

Input Shaft: 11/16"-36 Spline

Pitman Shaft: 1-1/8" Ford with 32 Splines and 4 Master Splines

Pressure Port: 16mm X 1.5 Flare (Located closest to engine)

Return Port: 16mm X 1.5 Flare (Located closest to input shaft)

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.0-2.5 GPM Flow Rate Recommended

Borgeson has now developed a modern power steering box for the 1965-1979 Mopars. This box fits both factory power & manual steering cars. The Borgeson conversion box offers a 14:1 quick ratio, firm modern power steering feel, drastically increased header clearance and a 10# weight savings over a factory power box. This box bolts directly to the stock K-member mounting location and fits the original 1-1/4” pitman arm. The steering column will need to be shortened for installation of this conversion box. Use of a power steering cooler is highly recommended in these applications. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
NOTE: This box will fit all original Mopar 1-1/4” pitman shafts. If you car has the smaller 1-1/8” pitman shaft you will need to purchase part #800126.

STEERING COLUMN MODIFICATIONS
The original steering column shaft will need to be cut and shortened for installation. Connection to the box is then made by drilling and pinning our #036425 Mopar vibration reducing universal joint coupling to the shortened steering column shaft. Drill bit and pins included with coupler.

Input Shaft: 11/16"-36 Spline

Pitman Shaft: 1-1/4" Mopar with 32 Splines and 4 Master Splines

Pressure Port: 16mm X 1.5 Flare (Located closest to engine)

Return Port: 16mm X 1.5 Flare (Located closest to input shaft)

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.0-2.5 GPM Flow Rate Recommended

Input Shaft: 17mm DD, 17mm Round shaft with two flat sides

Pitman Shaft: 1-1/8" GM with 32 Splines and 4 Master Splines

Pressure Port: M18 X 1.5 O-Ring or 11/16"-18 Flare, if using included flare inserts

Return Port: M16 X 1.5 O-Ring or 5/8"-18 Flare, if using included flare inserts

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.5-3.0 GPM Flow Rate Recommended