Power Conversion Kit for 1949-1951 Ford Cars (999062)
This power steering box is designed to replace the original manual box via a bracket which bolts to both the original frame and the new steering box. Our special pitman arm allows it to connect to either the original steering linkage or the highly recommended and vastly improved tie rod and idler arm conversion offered by Fatman Fabrications. The new box can be connected to either an aftermarket steering column, or the original steering column, including the shift levers, can be shortened to fit this box by using our optional Column Saver kit #990044. Conventional GM or Ford power steering pumps will typically provide the proper 900-1100 psi fluid and are easily connected with an optional hose kit. Not recommended for installation with a flat head engine. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
999062 SPECIFICATIONS:
Input Shaft: 11/16"-36 Spline
Pitman Shaft: Includes Pitman Arm
Pressure Port: 16mm X 1.5 Flare (Located closest to engine)
Return Port: 16mm X 1.5 Flare (Located closest to input shaft)
Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
Flow Rate: 2.0-2.5 GPM Flow Rate Recommended
This power steering box is designed to replace the original manual box via a bracket which bolts to both the original frame and the new steering box. Our special pitman arm allows it to connect to either the original steering linkage or the highly recommended and vastly improved tie rod and idler arm conversion offered by Fatman Fabrications. The new box can be connected to either an aftermarket steering column, or the original steering column, including the shift levers, can be shortened to fit this box by using our optional Column Saver kit #990044. Conventional GM or Ford power steering pumps will typically provide the proper 900-1100 psi fluid and are easily connected with an optional hose kit. Not recommended for installation with a flat head engine.All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
999062 SPECIFICATIONS:
Input Shaft: 11/16"-36 Spline
Pitman Shaft: Includes Pitman Arm
Pressure Port: 16mm X 1.5 Flare (Located closest to engine)
Return Port: 16mm X 1.5 Flare (Located closest to input shaft)
Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
Flow Rate: 2.0-2.5 GPM Flow Rate Recommended
- Part #999062
- CA Proposition 65WARNING
- WARNING:Cancer and reproductive harm - http://www.p65warnings.ca.gov
It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.
It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.