Mustang P/S Kit, 1968-1970 289/302/351W Power Steering

Part # 999024

1968-1970 Mustang complete 14:1 quick ratio power steering conversion kit. Fits 68-70 Mustangs with power steering and 289/302/351W V-8. Includes all necessary components for conversion. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY 

NOTE: Will not fit with factory Z-Bar clutch linkage.
  • $915.31
Qty:  
In stock (13 items available)
OR
1968-1970 Mustang complete 14:1 quick ratio power steering conversion kit. Fits 68-70 Mustangs with power steering and 289/302/351W V-8. Includes all necessary components for conversion. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY  
  
 NOTE: Will not fit with factory Z-Bar clutch linkage.
    • Weight
      25.34 lbs
    • Part #
      999024
  • Part #
    999024
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Fitment Type
    Vehicle Specific
Year Make Model
1968 Ford Mustang
1968 Mercury Cougar
1969 Ford Mustang
1969 Mercury Cougar
1970 Ford Mustang
1970 Mercury Cougar

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

Product questions

  • Colton Beierman
    Jul 5, 2022, 21:39

    Can the steering gear box be used with a late model power steering pump? In my 68 cougar I have a 5.0 with a pump from a 94 mustang. Will this low volume high pressure pump work with this box?

    Administrator
    Jul 6, 2022, 08:02

    This pump will operate our gearbox just fine however you will need to have a set of hoses made as we do not offer hoses for this application.

  • Ola Wesley
    Jun 28, 2022, 04:58

    Will this kit fit a '68 with a 390 Clevland?

    Administrator
    Jun 28, 2022, 08:23

    While all components in this kit will work with the 390 FE engine it is not a straight forward easy installation with a big block in a Mustang with our conversion box. Please call our office for additional details as to what is required for installation.

  • Lionel Reeve
    May 1, 2022, 14:48

    Hi, is the housing of the steering box cast in one piece or is the mounting bracket welded to the housing. Here in New Zealand we’re not allowed to use the welded type of mounting bracket.

    Administrator
    May 2, 2022, 09:20

    Our current production Mustang boxes are all a one piece casting. They have been cast since mid 2016.

  • Michael Moseley
    Apr 25, 2022, 08:25

    Can I purchase the high pressure hose fittings to custom fabricate the hose on our 69 Mustang? Headers re interfering with the hose on your kit already purchased.

    Administrator
    Apr 25, 2022, 08:36

    We do not sell the crimp on fittings separately as they require specific tooling and crimp pressure for a successful installation. We do offer -6AN fitting adapter for the box, part #925121 that can help you make a set of custom hoses.

  • James Janssen
    Apr 23, 2022, 12:46

    Will this kit fit a '68 with a 390 FE & factory power steering? Can I use my original pump?

    Administrator
    Apr 25, 2022, 08:44

    All components theoretically work for your application however installation with a big block is not straight forward which is why we do not market it for this application. You will need at a minimum adjustable motor mounts and headers to be able to clear the box.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Customers who bought this product also bought

Related products

Customers who viewed this product bought