Mustang P/S Kit, 1965-1966 289/302/351W Manual Steering

Part # 999020

1965-1966 Mustang complete 14:1 quick ratio power steering conversion kit. Fits 65-66 Mustangs with manual steering and 289/302/351W V-8. Includes all necessary components for conversion. All Borgeson power steering boxes and pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

 NOTE: Will not fit with factory Z-Bar clutch linkage.
 NOTE: Requires 2-Row crank pulley not included.
 NOTE: Will fit 1967 Mustangs with 1" pitman shaft.

 

  

  • $1154.00
Qty:  
In stock (15 items available)
OR

1965-1966 Mustang complete 14:1 quick ratio power steering conversion kit. Fits 65-66 Mustangs with manual steering and 289/302/351W V-8. Includes all necessary components for conversion. All Borgeson power steering boxes and pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

 NOTE: Will not fit with factory Z-Bar clutch linkage.
 NOTE: Requires 2-Row crank pulley not included.
 NOTE: Will fit 1967 Mustangs with 1" pitman shaft.
 
  

    • Weight
      50 lbs
    • Part #
      999020
  • Part #
    999020
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Fitment Type
    Vehicle Specific
Year Make Model
1965 Ford Mustang
1966 Ford Mustang
1964 Ford Mustang

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

Product questions

  • Scott Jones
    Apr 27, 2022, 22:17

    I have your 1965 manual steering kit and trying to use me original pitman arm. Does the pitman arm seat up tight to the provided boot or is there a little gap? Thank you for your time and help.

    Administrator
    Apr 28, 2022, 07:51

    It is a tapered spline connection and the arm will only go up until tight, a little gap is normal and the amount that the arm will go on will vary.

  • Gary Faxon
    Mar 17, 2022, 09:14

    Can the rag joint be replaced with your part #033425 and will the vibration dampening help with the hydraulic noise transfer? Thanks

    Administrator
    Mar 17, 2022, 09:22

    This joint has the correct spline sizes and will eliminate hydraulic noise however it is too long to allow the stock column to mount to the firewall as needed.

  • Rob Mahoney
    Jan 30, 2022, 23:42

    Can I replace the rag joint with a needle bearing coupler? If so, What are the specs for the coupler?
    Thank you - Rob

    Administrator
    Jan 31, 2022, 08:16

    You can, our universal joint part #013425 will have the correct ends, you will however end up getting some hydraulic noise passing up to the steering wheel.

  • bruce bousher
    Jan 24, 2022, 10:50

    will this kit fit 64 falcon

    Administrator
    Jan 24, 2022, 11:03

    This kit will not fit a Falcon, please contact our office to find out what components we have available for a Falcon.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Customers who bought this product also bought

Related products

Customers who viewed this product bought