P/S Conversion, 67-70 Mustang

Part # 800111

Power steering conversion box for 1967-1970 Ford Mustangs with 1-1/8" sector shaft. Modern integral power steering conversion box with a quick 14:1 quick ratio and firm modern feel. Steering column modifications required for installation, see product instructions for more info. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
 
NOTE: 1967 Used 1" & 1-1/8" pitman shafts measure first! 
NOTE: This box fits 60-65 Falcons with 1-1/8" Sector Shaft. 
NOTE: Will not fit with factory Z-Bar clutch linkage.
 
800111 SPECIFICATIONS:
 

Input Shaft: 11/16"-36 Spline

Pitman Shaft: 1-1/8" Ford with 32 Splines and 4 Master Splines

Pressure Port: 16mm X 1.5 Flare (Located closest to engine)

Return Port: 16mm X 1.5 Flare (Located closest to input shaft)

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.0-2.5 GPM Flow Rate Recommended

  • $576.45
Qty:  
In stock (16 items available)
OR
Power steering conversion box for 1967-1970 Ford Mustangs with 1-1/8" sector shaft. Modern integral power steering conversion box with a quick 14:1 quick ratio and firm modern feel. Steering column modifications required for installation, see product instructions for more info. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
 
NOTE: 1967 Used 1" & 1-1/8" pitman shafts measure first! 
NOTE: This box fits 60-65 Falcons with 1-1/8" Sector Shaft. 
NOTE: Will not fit with factory Z-Bar clutch linkage.
 
800111 SPECIFICATIONS:
 

Input Shaft: 11/16"-36 Spline

Pitman Shaft: 1-1/8" Ford with 32 Splines and 4 Master Splines

Pressure Port: 16mm X 1.5 Flare (Located closest to engine)

Return Port: 16mm X 1.5 Flare (Located closest to input shaft)

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.0-2.5 GPM Flow Rate Recommended

    • Weight
      21 lbs
    • Part #
      800111
  • Part #
    800111
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Fitment Type
    Vehicle Specific
Year Make Model
1968 Ford Mustang
1960 Ford Falcon
1961 Ford Falcon
1962 Ford Falcon
1963 Ford Falcon
1964 Ford Falcon
1965 Ford Falcon

Product questions

  • Derek Jewell
    May 23, 2022, 17:27

    I have all the equipment to convert to a complete SBF serpentine belt setup, the steering pump utilized is a saginaw pump from a 92 to 96 Econoline 150 van. Will this work with your box providing I get the correct hoses?

    Administrator
    May 24, 2022, 07:52

    This Saginaw pump will work just fine with our power steering box.

  • Mark M
    Apr 27, 2022, 16:17

    What fluid is recommended for this p/s box?

    Administrator
    Apr 27, 2022, 16:25

    If you are using our pump as well as our box we would recommend a standard GM power steering fluid such as an AC Delco 10-5073. If you are using the factory Ford pump use the Ford specified Type F

  • Bruce Bousher
    Feb 1, 2022, 10:32

    what else do I need for conversion from manual steering for 1964 Falcon with 1, 1/8 sector shaft. Pump and brackets etc

    Administrator
    Feb 1, 2022, 11:53

    Provided you have a 289/302 small block you will need box #800111, pump kit #800330, hose kit #925108 and column coupler #312500. The steering column does need to be shortened for installation.

  • Joseph Fernandez
    Dec 17, 2021, 22:19

    What type of fluid is used with the 800111 Box, and 800330 Pump.

    Administrator
    Dec 20, 2021, 09:22

    We would recommend a standard GM power steering fluid.

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Related products

Customers who bought this product also bought

Customers who viewed this product bought