1965-1970 Mustang Power Steering Conversion Box & Components


Borgeson offers modern integral power steering conversions for 1965-1970 classic Mustangs. The Borgeson conversion box is a new manufactured modern integral power steering gearbox. The Borgeson integral power steering gearbox provides true modern power steering feel, feedback and a quick 14:1 ratio. Borgeson has manufactured this box to bolt directly to the factory mounting location and to fit the stock pitman arm. The column will need to be collapsed or shortened for clearance of conversion box. (Details below)

Factory power steering cars will require either manual drag link #990050 or drag link adapter #990003

NOTE: 1967 Mustang owners must measure the sector shaft to see if it is 1” or 1–1/8” prior to purchase.

NOTE: Power conversion box will not fit with factory Z-Bar clutch linkage.



STEERING COLUMN MODIFICATIONS

1965-1967 Cars will need to trim the outer column tube for clearance of the rag joint and use replacement inner column shaft #990040. Conversion box will then connect to the stock column with rag joint #052534

1968-1970 Cars have a factory collapsible steering column. Gently tap on the rag joint flange with a rubber mallet to collapse the shaft in on itself for the needed clearance. Conversion box will then connect to column with half rag joint #990016.


Products: 1316 of 16

Bestsellers

Footer navigation