Borgeson offers modern integral power steering conversions for 1965-1970 classic Mustangs. The Borgeson conversion box is a new manufactured modern integral power steering gearbox. The Borgeson integral power steering gearbox provides true modern power steering feel, feedback and a quick 14:1 ratio. Borgeson has manufactured this box to bolt directly to the factory mounting location and to fit the stock pitman arm. The column will need to be collapsed or shortened for clearance of conversion box. (Details below)
Factory power steering cars will require either manual drag link #990050 or drag link adapter #990003
NOTE: 1967 Mustang owners must measure the sector shaft to see if it is 1” or 1–1/8” prior to purchase.
NOTE: Power conversion box will not fit with factory Z-Bar clutch linkage.
STEERING COLUMN MODIFICATIONS
1965-1967 Cars will need to trim the outer column tube for clearance of the rag joint and use replacement inner column shaft #990040. Conversion box will then connect to the stock column with rag joint #052534
1968-1970 Cars have a factory collapsible steering column. Gently tap on the rag joint flange with a rubber mallet to collapse the shaft in on itself for the needed clearance. Conversion box will then connect to column with half rag joint #990016.
1965-1970 Mustang Power Steering Conversion Box & Components
-
Steering Box Adapters 16MM X 1.5 to -6AN
Part # 925121
P/S Hose adapter set 16MM X 1.5 to -6AN for Borgeson Ford & Mopar power conversion boxes. Converts steering box 16MM inverted flare fittings to a -6AN for custom hose applications. Sold as a pair.
Regular Product -
P/S Conversion, 65-67 Mustang
Part # 800110
Power steering conversion box for 1965-1967 Ford Mustangs with 1" sector shaft. Modern integral power steering conversion box with a quick 14:1 ratio and firm modern feel. Steering column modifications required for installation, see product instructions for more info. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTYNOTE: 1967 Used 1" & 1-1/8" pitman shafts measure first!NOTE: This box fits 60-65 Falcons with 1" Sector Shaft.NOTE: Will not fit with factory Z-Bar clutch linkage.800110 SPECIFICATIONS:Input Shaft: 11/16"-36 Spline
Pitman Shaft: 1" Ford with 32 Splines and 4 Master Splines
Pressure Port: 16mm X 1.5 Flare (Located closest to engine)
Return Port: 16mm X 1.5 Flare (Located closest to input shaft)
Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
Flow Rate: 2.0-2.5 GPM Flow Rate Recommended
-
P/S Conversion, 67-70 Mustang
Part # 800111
Power steering conversion box for 1967-1970 Ford Mustangs with 1-1/8" sector shaft. Modern integral power steering conversion box with a quick 14:1 quick ratio and firm modern feel. Steering column modifications required for installation, see product instructions for more info. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTYNOTE: 1967 Used 1" & 1-1/8" pitman shafts measure first!NOTE: This box fits 60-65 Falcons with 1-1/8" Sector Shaft.NOTE: Will not fit with factory Z-Bar clutch linkage.800111 SPECIFICATIONS:Input Shaft: 11/16"-36 Spline
Pitman Shaft: 1-1/8" Ford with 32 Splines and 4 Master Splines
Pressure Port: 16mm X 1.5 Flare (Located closest to engine)
Return Port: 16mm X 1.5 Flare (Located closest to input shaft)
Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
Flow Rate: 2.0-2.5 GPM Flow Rate Recommended
-
P/S Hose Kit, Ford Pump to Ford Power Conversion Box. V-8
Part # 925107
2 Piece OEM style rubber power steering hose kit. Connects Ford power steering pump to Borgeson Ford power steering conversion box. V-8 applications only.
Regular Product -
P/S Hose Kit, Ford Pump to Ford Power Conversion Box I-6
Part # 925109
2 Piece OEM style rubber power steering hose kit. Connects Ford power steering pump to Borgeson Ford power steering conversion box. I-6 applications only.
Regular Product -
Z-Bar for Borgeson Box 65-66 SBF Only
Part # 990051
Replacement Z-Bar clutch linkage to clear Borgeson power steering conversion box. For 1965-1966 Mustangs with 289/302/351W only. Will not fit with Hi-Po manifolds. -
Steering Coupler, 11/16-36 Spline, With Disc
Part # 990016
OEM Style half rag joint steering coupler. Includes steering box side and rubber disc with hardware. Fits 11/16"-36 spline.
Regular Product -
Column Shaft / Floor Mount, 65-67 Mustang
Part # 990040
Replacement steering column shaft for 65-67 Mustangs. Allows use of aftermarket steering box with stock column. Shaft is 31-1/8" overall length and has the correct 11/16"-40 spline and 5/8"-18 thread for the factory steering wheel and a 3/4"-36 spline on the lower end.
-
11/16-36 X 3/4-36
Part # 052534
Steering Coupler, OEM Rag Joint Style, 11/16-36 X 3/4-36, 2-7/8" Overall Length, 3-1/4" Outside Diameter, Bolt and Pin Spacing is 2-7/16" On Center.
Regular Product -
P/S Pump Upgrade, SBF 289/302/351W
Part # 800330
Ford power steering pump upgrade. Fits Small Block Ford 289/302/351W. Includes Saginaw P/S pump, bracket, pulley and hardware. Requires use of proper crank and water pump pulleys for power steering applications. All Borgeson power steering pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
800330 SPECIFICATIONS:
Pulley Shaft: 3/4" Press Fit Shaft, Incudes One Row Pulley
Bracket: Ford Small Block 260, 289, 302, 351W
Pressure Port: 5/8"-18 Flare
Return Port: 3/8" Hose Barb
Pump Pressure: 1200-1350 PSI
Flow Rate: 2.7-3.5 GPM
-
P/S Pump Upgrade, Ford FE 390/428
Part # 800336
Ford power steering pump upgrade. Fits Big Block Ford FE 390/428. Includes Saginaw P/S pump, bracket, pulley and hardware. Requires use of proper crank and water pump pulleys for power steering applications. All Borgeson power steering pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
800336 SPECIFICATIONS:
Pulley Shaft: 3/4" Press Fit Shaft, Incudes One Row Pulley
Bracket: Ford FE 352, 390, 427, 428
Pressure Port: 5/8"-18 Flare
Return Port: 3/8" Hose Barb
Pump Pressure: 1200-1350 PSI
Flow Rate: 2.7-3.5 GPM
-
P/S Pump Upgrade, 1965-1970 Ford 200/250 6 Cylinder
Part # 800334
Saginaw P/S Pump Upgrade, 1965-1970 Ford 200/250 In-Line 6 Cylinder, Includes Saginaw P/S Pump, Bracket and Pulley. Requires use of proper crank and water pump pulleys for power steering applications. All Borgeson power steering pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY
800334 SPECIFICATIONS:
Pulley Shaft: 3/4" Press Fit Shaft, Incudes One Row Pulley
Bracket: Ford Inline 6 Cylinder 200, 250
Pressure Port: 5/8"-18 Flare
Return Port: 3/8" Hose Barb
Pump Pressure: 1200-1350 PSI
Flow Rate: 2.7-3.5 GPM
