Complete Conversion Kit, 58-64 Chevy, SBC/SWP

Part # 999014

1958-1964 Chevy complete power steering conversion kit. Includes re-manufactured Delphi 600 Power Steering Box, P/S Pump, Pump bracket, P/S Pulley, Universal Joint and Shaft. For cars with a SBC/SWP and a 3/4"-36 spline column. All Borgeson power steering boxes and pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

  • $948.60
Qty:  
In stock (10 items available)
OR

1958-1964 Chevy complete power steering conversion kit. Includes re-manufactured Delphi 600 Power Steering Box, P/S Pump, Pump bracket, P/S Pulley, Universal Joint and Shaft. For cars with a SBC/SWP and a 3/4"-36 spline column. All Borgeson power steering boxes and pumps are assembled and tested in the USA from globally sourced components and have a 3 year warranty. WARRANTY

    • Weight
      48 lbs
    • Part #
      999014
  • Part #
    999014
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Fitment Type
    Vehicle Specific
Year Make Model
1958 Chevrolet Bel Air
1958 Chevrolet Biscayne
1958 Chevrolet Del Ray
1958 Chevrolet Impala
1958 Chevrolet Nomad
1958 Chevrolet Yeoman
1958 Chevrolet Brookwood
1959 Chevrolet Bel Air
1959 Chevrolet Biscayne
1959 Chevrolet Impala
1959 Chevrolet Brookwood
1959 Chevrolet Kingswood
1959 Chevrolet Nomad
1959 Chevrolet Parkwood
1960 Chevrolet Bel Air
1960 Chevrolet Biscayne
1960 Chevrolet Impala
1960 Chevrolet Brookwood
1960 Chevrolet Kingswood
1960 Chevrolet Nomad
1960 Chevrolet Parkwood
1961 Chevrolet Bel Air
1961 Chevrolet Biscayne
1961 Chevrolet Impala
1961 Chevrolet Brookwood
1961 Chevrolet Kingswood
1961 Chevrolet Nomad
1961 Chevrolet Parkwood
1962 Chevrolet Bel Air
1962 Chevrolet Biscayne
1962 Chevrolet Impala
1963 Chevrolet Bel Air
1963 Chevrolet Biscayne
1963 Chevrolet Impala
1964 Chevrolet Bel Air
1964 Chevrolet Biscayne
1964 Chevrolet Impala

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

Product questions

  • Christopher
    Sep 16, 2022, 02:37

    Will this kit work on a 1963 impala with a Chevy LQ4 6.0 motor? If not, any suggestions?

    Administrator
    Sep 16, 2022, 08:04

    The included pump, bracket and pulley wont work for your application. You will be better off using the pump that comes with the swapped engine. We have a kit that includes just the box, universal joint and shaft, #999015 that would be a better choice for your application.

  • Dave T
    Jul 9, 2022, 10:58

    60 Chevrolet, Will any shafts need to be cut for your kit to work? Will the radiator need to be notched?

    Administrator
    Jul 11, 2022, 08:38

    Our box has been positioned to clear the larger 4 core and aftermarket aluminum radiators. Our kit includes the shaft needed to connect to your factory steering column. You will need to drill one new hole for the idler arm to match the new angle of the steering box.

  • rajesh bridgemohan
    Dec 31, 2021, 09:48

    Does the pitman arm have to be changed when converting from manual steering to this kit in a 1963 impala

    Administrator
    Jan 3, 2022, 08:06

    Our conversion box uses the factory original manual steering pitman arm.

  • Geoff Browne
    Dec 5, 2021, 12:47

    Does this kit for Chevy 58 - 64 work with a 235 cu. 6 cylinder? or Does it require a special bracket for the pump and hoses? I have seen a special bracket for use on a 235 that mounts an altenator above - Your advise would be most appreciated.

    Administrator
    Dec 6, 2021, 08:22

    This kit includes a bracket for a V8 small block, we do not currently offer a bracket for the 6 cylinder engines. All other components in the kit will work with your application.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Related products

Customers who bought this product also bought

Customers who viewed this product bought