70-'79 Full Size Ford Truck

Part # 000970

1970-1979 Ford truck heavy duty telescopic steel steering shaft. Connects from factory column to steering box. Extreme duty with two billet steel universal joints. All Borgeson direct replacement steering shafts are made in the USA and have a 5 year warranty. WARRANTY

  • $273.42
Qty:  
In stock (29 items available)
OR

1970-1979 Ford truck heavy duty telescopic steel steering shaft. Connects from factory column to steering box. Extreme duty with two billet steel universal joints. All Borgeson direct replacement steering shafts are made in the USA and have a 5 year warranty. WARRANTY

    • Weight
      5.8 lbs
    • Part #
      000970
  • Part #
    000970
  • CA Proposition 65
    WARNING
  • WARNING:
    Cancer and reproductive harm - http://www.p65warnings.ca.gov
  • Fitment Type
    Vehicle Specific
Year Make Model
1976 Ford F-150
1976 Ford F-100
1976 Ford F-250
1976 Ford F-350
1971 Ford F-350
1971 Ford F-250
1971 Ford F-100
1973 Ford F-100
1973 Ford F-250
1973 Ford F-350
1972 Ford F-350
1972 Ford F-100
1972 Ford F-250
1978 Ford F-150
1978 Ford F-100
1978 Ford F-250
1978 Ford F-350
1974 Ford F-100
1974 Ford F-350
1974 Ford F-250
1975 Ford F-250
1975 Ford F-150
1975 Ford F-100
1975 Ford F-350
1979 Ford F-100
1979 Ford F-250
1979 Ford F-350
1979 Ford F-150
1977 Ford F-150
1977 Ford F-250
1977 Ford F-100
1977 Ford F-350
1970 Ford F-100
1970 Ford F-350
1970 Ford F-250

Product questions

  • Mike Madden
    Sep 16, 2022, 17:34

    What is the outside diameter of the ujoint that connects to the steering box?

    Administrator
    Sep 19, 2022, 08:29

    The OD of the vibration reducing universal joint at the steering box at its widest point is 1-3/4"

  • Dan
    Jun 19, 2022, 03:13

    What is the overall length of the shaft from end to end of the u joints when fully extended and fully collapsed?

    Administrator
    Jun 20, 2022, 08:26

    The fully extended length is 32" and the collapsed length is 26", shaft can also be trimmed up to 10" in length.

  • Bradley
    Nov 27, 2021, 14:02

    What are the connections for these to the steering column and the steering gear box? 3/4" 36 tooth connections? Or does the connection to the steering column have a flat side with the holding screw groove on the opposite? I'm hoping to find a shaft that has a 3/4" 36 tooth completely round connection on both ends of the steering shaft. Thank you.

    Administrator
    Nov 29, 2021, 08:17

    This shaft has a 3/4"-36 spline connection on both ends, both joints are splined around the full circle with no flats.

It is our policy to charge only the actual UPS or FedEx shipping charges. We ship via Ground, 3 Day , 2nd Day Air or Next Day Air. On small shipments to the west coast, we recommend 3 Day because it cuts about 3 days in transit and is not much more expensive than the regular ground service. Most orders placed by 1:00 PM EST will be shipped the same day. If you are in urgent need of a product please contact the sales office at (860)482-8283 to insure we can ship the item immediately.

It is our policy to accept any inventory product purchased directly from us and currently offered for sale in our catalog for exchange or, at our option, a refund. All items are subject to a 10% restocking fee. Products must be in resalable condition with no paint or alterations. If rework is necessary, the cost of the rework will be deducted from the credit allowed. If a product was purchased from a Borgeson dealer, the return must be handled through that dealer. Before any item can be returned to us, a Return Authorization Number must be obtained from us. COLLECT CALLS OR C.O.D. SHIPMENTS ARE NOT ACCEPTED. The Return Authorization Number must be clearly marked on the outside of the box and paperwork with replacement instructions must be included.

Customers who bought this product also bought

Customers who viewed this product bought